SG-DA61500 / 010-02161-00
Manuals & Downloads
- Installation Instructions - English (894.09 KB PDF) Download
- Installation Instructions - Danish (797.898 KB PDF) Download
- Installation Instructions - German (806.718 KB PDF) Download
- Installation Instructions - Greek (815.307 KB PDF) Download
- Installation Instructions - Spanish (798.88 KB PDF) Download
- Installation Instructions - Finnish (792.298 KB PDF) Download
- Installation Instructions - French (799.534 KB PDF) Download
- Installation Instructions - Hungarian (794.925 KB PDF) Download
- Installation Instructions - Italian (795.995 KB PDF) Download
- Installation Instructions - Japanese (965.297 KB PDF) Download
- Installation Instructions - Norwegian (794.851 KB PDF) Download
- Installation Instructions - Dutch (799.176 KB PDF) Download
- Installation Instructions - Polish (807.438 KB PDF) Download
- Installation Instructions - Portuguese (799.245 KB PDF) Download
- Installation Instructions - Slovenian (796.353 KB PDF) Download
- Installation Instructions - Swedish (795.614 KB PDF) Download
- Installation Instructions - Chinese (Simplified) (1.099 MB PDF) Download
- Installation Instructions - Chinese (Traditional) (1.235 MB PDF) Download
Warranty & Compliance
- Warranty Information (5.62 MB PDF) Download
Search Help Topics
We didn't find any results for the search
My Fusion system has a loud hum or noise coming from the speakers connected to my amplifier.
This is normally caused by introduced interference through the RCA cables connected from the stereo to the amplifier and is often referred to as a ground loop. It can be caused by numerous electric sources of interference such as refrigerators, power and ground cables, LED lights etc. You can spend a lot of time searching for the source, so prevention is the best course - do not run RCA cables near any electrical equipment or power/ground cable runs.
The quickest way to resolve this is by fitting ground loop isolators on all RCA cables - this is an inexpensive way to remove the unwanted noise.
Thank you, your products have been registered. You will receive a confirmation email shortly.Back to Form
We could not register your products due to an error. Please resolve the issues below or contact us directly.
Error Details Explanation Text
Our most stunning, efficient and powerful marine amplifiers for the ultimate audio experience.
Introducing an impressive new addition to Fusion’s Signature Series marine amplifier range: the SG-DA61500.
Fusion Signature Series amplifiers are purpose-built for the marine environment. Boasting some of the most impressive environmental protection available, they deliver a Signature performance on the water like never before.
One of our most efficient, stunning and powerful marine amplifiers, the SG-DA61500 also features a True-Marine design that will resist corrosion. Its incredible 1500 Watt peak power will power up to 6 pairs of speakers at 2 Ohms (2 x 4 Ohm speakers per channel in parallel) or up to 4 pairs of speakers at 2 Ohms (2 x 4 Ohm speakers per channel in parallel) and 1 subwoofer. RCA line-level inputs allow for easy connection to new or existing systems.
The SG-DA61500 is Fusion's first 6 channel, Class-D Hi-Fi marine amplifier. The key benefit of a Class-D amplifier is that it has a low battery drain with high output, making this the perfect amplifier for the marine environment. The SG-DA61500 also has conformal coated PCBs for maximum product life and performance, plus the amplifier chassis is a heat sink, to reduce component core temperature and increase efficiency.
Undeniably a stand-out piece, the stunning stainless steel mirror control panel cover conceals and protects all cable connections and setting controls, with an attractive finish to complement any installation.
This product is rated True-Marine and carries a 3-year limited consumer warranty.
Class-D Amplifier Technology - The highly efficient Class-D design provides 1500-Watts peak power whilst drawing less current than a standard Class-AB amplifier. This design provides increased efficiency and power output to your speakers, letting you enjoy your music for longer.
1500 Watts Peak Power – With a peak power of 1500 watts, you can easily power up to 6 pairs of speakers or up to 4 pairs of speakers with a subwoofer.
Marine-Ready Design with Conformal Coated PCBs - Extending the life of your amplifiers, the Signature Series are designed specifically for marine use with conformal coated PCBs to provide extra protection from the marine elements.
Rigid Aluminum Alloy Heat Sink - Molded to form a singular die-cast chassis, the fin layout is calculated with precision to increase the surface area of the heat sink and improve heat dissipation.
Stainless Mirror Finish - The polished stainless-steel control panel cover conceals and protects all cable connections and settings controls whilst providing an attractive finish to complement any installation.
Speaker Configuration - Whether you require 2 Ohms per channel or 4 Ohms bridged, your Signature Series amplifier has your installation options covered to achieve the optimum output levels.
Connect up to 2 speakers per channel (2 x 4 Ohm speakers in parallel) with your SG-DA61500.
Zone Designation - To align with the Fusion entertainment system zone philosophy, the input and output connections are labelled as zones.
True-Marine Design - Signature Series amplifiers are perfect for the marine environment, and carry a 3-year warranty.
The Power of Music
Designed by musicians and engineered by boaties, the Signature Series is a fusion of these two fundamentals. The result is the formation of a truly immersive musical experience. By incorporating the finest materials with True-Marine™ engineering practices, we have shaped a series so acoustically stunning and at the same time so robust, that it feels right at home on the water.
Class-D Amplifier Technology
Our most efficient, stunning and powerful amplifier series features Class-D Technology. The highly efficient 1500 Watt amplifier design ensures lower battery drain with a higher output in comparison with Class-AB amplifiers. This delivers increased power to the connected speakers and/or subwoofers, extending your audio entertainment experience to a whole new level.
The True-Marine Standard
As a True-Marine product, the Signature Series marine amplifiers are designed and engineered for the harsh marine environment. Once a product has been subject to rigorous environmental testing and passed our stringent True-Marine approval process, it is recognized with an industry-leading 3 year consumer warranty.
Rigid Aluminum Alloy Heat Sink
Providing increased efficiency without compromising the form factor, the Signature Series amplifier range features a rigid aluminum alloy heat sink. Greater heat dissipation and unquestionable efficiency is achieved with molded fins forming a singular die-cast chassis, with the layout precisely calculated to increase the surface area of the heat sink.
Are you ready to experience the Power of Music?WHERE TO BUY
Are you ready for the new era of marine audio entertainment?
Request a Quote
Please select a product
No stores found.
Request a Quote
Get a quote from your nearest FUSION dealer
We've sent you a confirmation email.
You should hear back from these dealers shortly.
|Frequency Response||10 Hz to 40 kHz (-3dB @ 4 Ohm rated power)|
|Peak Power Output||1500 W|
|Rated Power Output (4 Ohm)||100 W rms x 6 @ 14.4 V input < 1% THD + N (EIA/CEA-490A)|
|Rated Power Output (2 Ohm)||140 W rms x 6 @ 14.4 V input < 1% THD + N (EIA/CEA-490A)|
|Rated Power Output (4 Ohm Bridged)||280 W rms x 3 @ 14.4 V input < 1% THD + N (EIA/CEA-490A)|
|Input Sensitivity||0.3 V to 8 V rms, user adjustable|
|Input Impedance||7k Ohm nominal|
|High-Pass/Low-Pass Full Range Filter||Yes, user selectable|
|Filter Cross-Over Frequency||32 Hz to 320 Hz, user adjustable|
|Bass-Boost||0 to 9 dB, user adjustable (zone 3 only)|
|Operating Voltage||10.8 V to 16 V dc|
|Remote Switch-On||Yes - 6 V threshold|
|Current Consumption (Standby)||< 1 mA @ 14.4 V input|
|Current Consumption (Idle)||< 2.5 A @ 14.4 V input|
|Current Consumption (Max)||75 A @ 14.4 V input|
|Fuse Rating||3 x 40 A ATC Blade-Type (SAE J1171 Compliant)|
|Protection Circuits||Reverse-Voltage, Input Under/Over Voltage, Over-Temperature, Output Short-Circuit|
|Operating Temperature Range||0 to 50°C (32 to 122°F)|
|Ingress Protection Rating||Dry area installation only|
|Dimensions||420 mm (L) x 210 mm (W) x 57 mm (H) or 16-9-16" (L) x 8-1/4" (W) x 2-1/4" (H)|
|Weight||5.15 kg or 11.35 lb with cover|